Introducing the PK125-TC air extractor from Primaklima. This extractor provides an airflow of 400m³/h thanks to its 60W centrifugal motor. Fitted with a 2-metre probe, it will activate according to the speed and temperature settings required. The inlet and outlet flanges are 125 mm in diameter.
Introducing the PK125-TC air extractor from Primaklima. This extractor provides an airflow of 400m³/h thanks to its 60W centrifugal motor. Fitted with a 2-metre probe, it will activate according to the speed and temperature settings required. The inlet and outlet flanges are 125 mm in diameter.
The PK125-TC fan gives you optimum control over your grow tent. As shown below, you will have a knob to set the required temperature (T°C adjustable from 20 to 30°C) and another to set the speed percentage ranging from 0 to 100%. With your programming and the sensor, your extractor will only be activated when necessary.
With a ball-bearing mounted turbine, you'll get relatively low noise levels. The rear-curved position of its polyamide fan blades produces 15% more airflow than an axial extractor. Made entirely from fire-retardant polyamide (shell, casing), you can easily mount it on the floor, wall or ceiling.
With 125 mm diameter inlets and outlets, you can connect them to aluminium, PVC or acoustic ventilation ducting, or even accessories such as silencers, anti-odour filters, etc.
