Prima Klima's ECTC air extractor provides optimum ventilation in indoor growing areas. With a diameter of 150 mm and an impressive ventilation capacity of 1100m³/h, thanks to its 170W centrifugal motor. This extractor guarantees rapid air renewal, crucial for the well-being of indoor plants.
The PK150-TC extractor gives you optimum control over your grow tent. As shown in the diagram below, there is a knob to set the required temperature (T°C adjustable from 20 to 30°C) and another to set the speed percentage ranging from 0 to 100%. With your programming and the sensor, your extractor will switch on when required.
With a turbine mounted on ball bearings, you'll get relatively low noise levels. The rear-curved position of its polyamide ventilation blades produces 15% more airflow than an axial extractor. Made entirely from fire-retardant polyamide (shell, casing), you can easily mount it on the floor, wall or ceiling.
With 150 mm diameter inlets and outlets, you can connect them to aluminium, PVC or acoustic ventilation ducting, or even accessories such as silencers, anti-odour filters, etc.
Tips for optimum use of the PK150-TC air extractor:
Optimum positioning: Install the air extractor at the top of the growing area to ensure efficient extraction of warm air. This will promote adequate air circulation throughout the growing area.
Proper mounting: Make sure the air extractor is properly secured in the grow space, using solid fixings to avoid excessive vibration that could affect its operation.
Combination with an activated carbon filter: To eliminate odours, combine the air extractor with an activated carbon filter. Install it upstream of the extractor to filter the extracted air effectively and maintain a discreet growing environment.
Regular maintenance: Check that the motor is working properly and lubricate if necessary to extend its life.
Use of speed controls: Adapt the fan speed to the specific needs of your growing space and environmental conditions to maximise energy efficiency.
Monitor temperature and humidity: Use a thermometer-hygrometer to regularly monitor the temperature and humidity in your indoor grow space. Adjust the air extractor accordingly to maintain optimum conditions for plant growth.
